Day 7| GhPython scripting in grasshopper: Task 1,2,3

6 years ago Rajkumar Dindor Leave a Comment on Day 7| GhPython scripting in grasshopper: Task 1,2,3
Save
Day 7| GhPython scripting in grasshopper: Task 1,2,3

Information

    Date: 01.07.2020 

    Task 1

    Title: GhPython Scripting to create geometry in grasshopper.

    Software used: Python, Grasshopper, Rhino6

    Tools Used: GhPython Script, Curve, List item, Panel, Point, Construct Point

    The session was to learn python scripting to create geometry in grasshopper. In this exercise, a circle and an arc was created.

    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Circle created in rhino from python scripting.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Finding area of the circle through python script.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Creating a line segment between the point constructed and the centre of the circle.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Arc generated through the centre of the circle and the constructed point.

    Task 2

    Title: Room generated through GhPython Scripting.

    Software used: Python, Grasshopper, Rhino6

    Tools Used: Curve, GhPython Script, Area, Panel, Offset curve, Explode, Loft, List item, Curve middle, Rectangle, Extrude, Cap holes, Solid difference

    This exercise was to generate a room in grasshopper and control the size of it through GhPython script.

    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    A rectangular curve assigned to GhPython.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Offset of the rectangle through the scripting done in GhPython.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Conditioning done in GhPython for the size of the room.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Creating an opening in the room by culling one geometry with the other geometry.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Opening created on the wall of the room.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Two rooms created based on the condition given in GhPython script.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Resizing of the room done by changing the values through a number slider in the grasshopper.

    Task 3

    Title: Generating Iceray Pattern in grasshopper though GhPython Scripting.

    Software used: Python, Grasshopper, Rhino6

    Tools Used: Curve, GhPython Script, List item

    This exercise was to generate Iceray Pattern to build an understanding of the use of conditioning functions in GhPython scripting.

    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    A rectangular curve assigned to GhPython.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    GhPython scripting to generate patterns.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Pattern generated
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Pattern generated on further subdividing the curves.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Grid created on value of percentage and level put to similar ratio.
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Listing of an individual unit.

    Images

    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3
    Day 7| GhPython scripting in grasshopper: Task 1,2,3

    Author

    Rajkumar Dindor

    Rajkumar Dindor is an architect graduated from Faculty of Architecture, CEPT University, India. He has been teaching as a Visiting Faculty at CEPT University since 2018 and also runs his own architecture & design practice with his partner, Prachi Nagar, at Ahmedabad.

    Leave a Reply